SCHILLER AT-101 ECG Machine Display 23001998RO1 A0801024 REV 010026
ECG Display High Resolution Screen
■ Product Describe
SCHILLER AT-101 ECG display (model 23001998RO1 A0801024 REV 010026)
One of the most important accessories of the SCHILLER AT-101 ECG
Machine display component, it is responsible for displaying the
signals transmitted by the mainboard on the display, such as ECG
waveforms, patient information, parameter settings or other
functional operation interfaces.
The function of the display is very user-friendly and plays an
important auxiliary role in clinical diagnosis. Medical staff can
see the heart rate changes of the observed person in real time
during outpatient, emergency or surgery, and assist medical staff
to quickly determine whether the heart rate is abnormal (such as ST
segment elevation). Medical staff can adjust the treatment methods
according to the situation in time. It is also convenient for
equipment debugging. Engineers can view system logs, calibrate lead
signals or run system self-test mode through the display. It can
also be used for teaching demonstrations, connect the device to a
projector, and share cases with medical students or interns as case
analysis.
The product has many advantages. First, the display is very
durable, running continuously for 72 hours without any problems and
has a strong battery life. Secondly, the display supports 95% of
the sRGB color gamut, and some color alarm signs can be accurately
displayed on the display, such as the red warning for heart rate
exceeding the limit.To prevent the screen from aging due to
excessive use, you can use the automatic display protection mode to
turn off the backlight regularly (for example, when not in use for
more than 40 minutes).
■ Product Picture
■ Functions
1. Display real-time waveform
Display the ECG waveform monitored by 12 leads on the display in
real time, and support split-screen display of 3/6/12 channels.
Adjustable dynamic waveform speed, such as 25mm/s, 50mm/s, and gain
sensitivity, such as 10mm/mv
2. Visualization of functional operation
The device menu can be displayed on the display, such as lead
selection, filter setting, and patient information entry, etc., and
the parameter setting can be completed with the keyboard of the ECG
electrocardiogram.
3. Equipment data and system maintenance
Display the real-time power of the device on the display, and
medical staff can observe and prepare for charging at any time to
avoid power outages interrupting monitoring
Network connection status, error codes, and system prompts can also
be displayed on the display one by one.
■ Products Parameters
| Product Name | Display |
| Screen type | High resolution TFT-LCD (medical grade anti-glare design) |
| Resolution | 1280×800 pixels to ensure clear waveform details |
| Screen Size | 10.1 inches (diagonal) |
| Interface Type | LVDS digital interface connected to the motherboard (MK21-10A),
anti-reverse insertion design |
| Brightness adjustment | Supports 8 levels of backlight adjustment (50-500 cd/m²) to adapt
to strong light in the operating room or night environment |
| Protection level | IPX1 (protected against vertical dripping liquid), surface covered
with antibacterial coating |
| Operating temperature | 0°C ~ 45°C |
■ Installation steps
How to replace the display screen?
1. Cut off all power to the device
2. Turn off the device and unplug the device battery and wait for
about 10 minutes to let the residual power discharge
3. Remove the device housing fixing screws and unplug the display
screen wiring ports one by one (mark the connection direction)
4. Remove the old display screen and install the new screen
5. Install the wiring ports one by one according to the marked
wiring ports during removal to ensure that the display screen is
not damaged.
6. Install the housing
7. Check whether the new display screen displays normally, test the
display integrity (no bad pixels, flickering), and run the display
test mode (press and hold the ↑↓ keys at the same time to turn on
the machine)
