ZOLL M Series Defibrillator Standalone Isolated Power Supply Module with EtCO2 9301-0314-02

► Isolated Power Supply Module

The isolated power supply provides an electrically isolated power supply to the EtCO2 and SpO2 modules. It also provides electrically isolated serial communication and isolated control signals between the EtCO2 and SpO2 modules and the main system PWBA.

► About Power Supply

The power supply converts DC power from a removable battery or AC/DC battery charger module to the voltage required by the M Series hardware.

The power circuit converts the raw battery or PWBA charger output voltage from +8.5 VDC to +16 VDC, including charge and line regulation, to the voltages shown in the following table.

► Power Supply Test

Tools needed:

• 1 red micro alligator test lead per micro alligator.

• 1 black micro alligator test lead per micro alligator.

• DC power supply (15 amp minimum).

• 0.1 ohm resistor 1% (¼W or more).

• 1000 ohm 1% resistor (¼W or more).

• Fluke 75 multimeter or equivalent.

Test setup:

Make sure the device and power supply are turned off.

Connect one end of the black wire to the "-" terminal in the battery compartment.

Connect the other end of the black wire to the "-" terminal of the power supply.

Connect the red wire to the "+" terminal socket of the battery compartment. Use a center peg with a protective plastic sheet around it.

Connect the other end of the red wire to the "+" terminal of the power supply.

Set the power supply voltage to 7V.

Caution

Be sure to connect the power supply properly to the M Series battery well terminals or damage to the unit may result. Do NOT raise the power supply voltage above 12V.

► Specification of ZOLL M Series Defibrillator Standalone Isolated Power Supply Module with EtCO2 9301-0314-02

► Photo of ZOLL M Series Defibrillator Standalone Isolated Power Supply Module with EtCO2 9301-0314-02

Thank you so much for your attention .If you're interested in ZOLL M Series Defibrillator Standalone Isolated Power Supply Module with EtCO2 9301-0314-02 ,feel free to contact us .Thank you .

China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-term friendly business relationship. Company mainly engaged in patient monitor and other medical machine products. Since its inception continue to absorb a variety of talents, improve product quality, improving staff quality, in order to grow their companies. Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uPHiliphold the "quality, integrity and pragmatic, motivated, service-oriented" business PHiliphilosoPHiliphy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. Our company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic.Business prospects and good, the next time, our company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter in medical equipment field.