Sign In | Join Free | My burrillandco.com
Home > Patient Monitor Parts >

PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8

China World Technology Medical Equipment Service Group
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 from wholesalers
     
    Buy cheap PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 from wholesalers
    • Buy cheap PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 from wholesalers
    • Buy cheap PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 from wholesalers
    • Buy cheap PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 from wholesalers
    • Buy cheap PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 from wholesalers

    PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8

    Ask Lasest Price
    Brand Name : PHiliph
    Model Number : M8048A FMS-8
    Payment Terms : Full before shipment
    Delivery Time : 3-5 working days
    MOQ : One piece
    • Product Details
    • Company Profile

    PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8

    M8048A FMS-8 PHiliphhilip MP60 MP70 Patient Bedside Monitor Module Rack


    PHiliphhilip FMS module rack


    MAX weight:<3500g ,<7.7 lb

    Weight*Height *Width:<315mm*130mm*120mm (12.4*5.1*4.7inch )


    Flexible Module Server Troubleshooting


    SymptomsCause of FailureFailure Isolation and Remedy
    Prompt Message “Unrecognized Measurement Module in slot s” is issuedAn unsupported module has been plugged into the Flexible Module ServerUnplug the unsupported module
    Prompt message “Measurement Module in slot n is currently ignored” is issuedToo many modules of the same kind have been plugged into the Flexible Module ServerUnplug module in slot n
    Red Error LED stays onUnrecoverable hardware selftest error:Try connecting the MMS directly to the MSL cable. If the measured value is displayed on the screen, the fault is in the FMS
    MSL cable defectiveIf no measurements are displayed when the MMS is directly connected to the MSL cable, replace the MSL cable
    Flex connector from main board to MSL defectiveReplace connector
    CPU module defectiveReplace CPU module
    Red Error LED flashesHardware selftest errorIf system comes up, check status log. Otherwise see above
    Flexible Module Server LEDs OK, Front Measurement Module not recognized (silent or INOP)Damaged measurement module or measurement module connectorReplace Measurement Module
    No Front-End power because MSL voltage from the monitor is too high or too low

    1. Try a new MSL cable. Replace if failure is rectified.

    2. Replace mother board

    Mother board or connector on Mother Board defectiveIf the voltage is within range, or if the connector is visibly damaged, replace the motherboard

    PHiliphhilip FMS/MMS Module Lock


    The following parts and hardware are included in this mounting kit


    Item #DescriptionQty
    1Main Enclosure1
    2Support Bracket1
    3#8-32 x 1/4'' Button Head Machine Screw, Tamper-proof4
    45/32'' Hex Wrench, Tamper-proof1

    Mounting Notes: The bracket is designed to accommodate FMS (handle on both ends) or MMS extension (handle on one end). Installation is only shown on FMS with MMS extension.


    Installing the Module Lock


    1. After installing the required modules, slide the FMS into the main housing as shown below. Installation Note: It is not necessary to remove the previously installed mounting clips from the FMS to install the module lock.


    2.Slide the support bracket over the MMS extension and into the main housing as far as it will go. Note the slot on the bracket for mounting the module lock on the second handle.


    3.Using the 5/32'' tamper-resistant hex key provided, install four (4) #8-32 x 1/4'' tamper-resistant screws as shown below.

    Installation Notes: Module locks are designed to provide space for individual modules to be disconnected without removing them from the server.


    Quality PHiliph MP60 MP70 Patient Monitor Module Rack Bedside M8048A FMS-8 for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: China World Technology Medical Equipment Service Group
    *Subject:
    *Message:
    Characters Remaining: (0/3000)