1406-8202-00-S GE Datex-ohmeda Valve Adjustable Pressure Limiting (APL) Assembly BCG for Aestiva7100 Anesthesia

About GE Datex-ohmeda Valve Adjustable Pressure Limiting (APL) Assembly BCG for Aestiva7100 Anesthesia 1406-8202-000-S

The Adjustable Pressure Relief Valve (APL) is a user adjustable valve that releases gas into the purge system. It is used to control the pressure in the respiratory system. APL is provided on the main manifold assembly. Releases anesthetic gas in the anesthetic gas evacuation system (AGSS) and sets pressure limits for manual ventilation in the air tubing through the diaphragm. AGSS removes spent anesthetic gases from anesthesia machines in areas such as operating rooms to eliminate potential long-term health risks for exposed medical personnel. The APL is mounted on an elastic and expandable gasket. Gas flows from the patient to the purge system through the APL valve, where the pressure fluctuates regularly. This valve is used in many medical systems such as MS CARESCAPE ™ Monitor B850, ARC Aespire 7900, ARC Aespire View, MIC Giraffe ™ Incubator, MS CIC Pro, ARC iVent 201, etc.

Features

• High tear strength and temperature resistance
• High stiffness and hardness
• High crystal
• Fully cured and durable
• Low coefficient of friction
• High flexibility and tensile strength
• Waterproof and non-toxic
• high gloss surface
• smooth, polished paper
• Excellent dimensional stability

• Canister release
• Auxiliary common gas outlet — ACGO (optional)
• ACGO switch
• O2 sensor
• Flow sensor module
• Circuit module
• Bag arm
• Bag/Vent switch
• Bellows
• Airway pressure gauge
• APL valve

The APL valve (A) sets the pressure limit for manual ventilation.

When you turn the APL knob, it applies more or less force to the APL disc and seat (D/S). If the circuit pressure is too high (6), the disc and seat in the diaphragm open and vent the gas to the scavenging system (7).

Test the APL valve

A. Check and reset if necessary (see section 6.6).

B. Make sure AGSS is working.

C. Insert the patient connector by connecting it to the test port on the handle.

D. Connect the bag arm to the test connector.

E. APL completely open at MIN.

F. Set O2 flow to 3 L/min. The pressure indicated on the manometer should not exceed 3.0 cm H2O.

G. Set the total fresh gas flow to 30 l/min*. The pressure indicated on the gauge should not exceed 4.0 cm H2O.

H. At a flow rate of 30 l / min, the valve is controlled at intermediate settings of approx. 20, 30 and 50. Note that the scale is only an approximation. The pressure should stabilize with each adjustment; however, fluctuations on the order of 8 cm H2O (min to max) are acceptable**. Make sure the APL valve is tactile when turned in the 30-70 cm H2O range and that the knob does not turn on its own.

I. Set the APL to 70 at a flow rate of 30 L/min. The pressure indicated on the manometer must be between 60 and 85 cm H2O, including fluctuations.

J. Set APL to MIN.

K. Remove bag arm cap and replace with bag. The bursa should be fully inflated.

L. Minimize O2 flow and turn off all other flow controls.

M. The stock market should stay up

If you're interested in 1406-8202-00-S GE Datex-ohmeda Valve Adjustable Pressure Limiting (APL) Assembly BCG for Aestiva7100 Anesthesia ,feel free to contact us .Thank you .

China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-term friendly business relationship. Company mainly engaged in patient monitor and other medical machine products. Since its inception continue to absorb a variety of talents, improve product quality, improving staff quality, in order to grow their companies. Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uPHiliphold the "quality, integrity and pragmatic, motivated, service-oriented" business PHiliphilosoPHiliphy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. Our company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic.Business prospects and good, the next time, our company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter in medical equipment field.